Model# GT5-12

GT5-12

JBL   Product Detail

Single-Voice-Coil Subwoofer


€ 44,99

  • Plus One® Technology

    Plus One carbon-injected cones provide more overall speaker-cone area than other cones in its class. The result is a better low-frequency response and a greater ability to make those important musical notes that people often associate with larger speaker sizes

  • Exclusive Design

    Exclusive design

The GT5-12 features a single 4-ohm voice coil and a vented motor structure, and offers 1100 watts of peak power handling. With its fully vented motor structure and rubber-coated tinsel leads, the GT5-12 can withstand even the most intense bass assault. And unlike competing entry-level subwoofers, the GT5-12 is based on a solid motor structure featuring two large magnets covered by the classic JBL® rubber ring.

Specsheets & manuals

Woofer Features/Specifications
TypeCar Subwoofer
Low-Frequency Transducer12" (305mm) Polypropylene cone
Voice Coil2" (51mm) diameter
Power Handling, RMS275 W
Power Handling, Peak1100 W
Frequency Response27Hz–450Hz
Nominal Impedance4 ohms
Sensitivity (2.83V @1m)90 dB
Diecast Aluminum FrameNo
Vented PolepieceYes
SurroundHi-roll rubber
Progressive SpiderYes
GrilleNone
External Diameter (Metric, English)12-5/16" (313mm)
Mounting Cutout Diameter (Metric, English)11-1/4" (286mm)
Mounting Depth (Metric, English)6-7/16" (164mm)
Thiele-Small Parameters
Voice Coil DC Resistance (Revc – ohms)4
Voice Inductance @ 1kHz (Levc – mH)1.26
Driver Radiating Area (Sd – in2/cm2)82.15/530
Motor Force Factor (Bl – Tm)15.2
Compliance Volume (Vas – ft3 / l)1.9/54.2 Vas – ft3 / l
Suspension Compliance135.00 Cms – μm/N
Moving Mass, Air Load223.0 Mms – g
Moving Mass, Diaphragm216.0 Mmd – g
Free-Air Resonance29.00 Fs – Hz
Mechanical Q6.39 Qms
Electrical Q 0.64 Qes
Total Q0.58 Qts
Magnetic Gap Height (Hag – in/mm)0.315/8
Voice Coil Height (Hvc – in/mm)1.43/36.4
Maximum Excursion (Xmax –in/mm)0.56/14.2