BDS 785S


5.1-channel, 525-watt, 4K upscaling Blu-ray Disc™ System with Spotify Connect, AirPlay and Bluetooth® technology

Home theater comes alive with tomorrow’s wireless HD technology.

The new Harman Kardon BDS 785S is a high-performance, 5.1-channel, 525-watt, 4K upscaling Blu-ray home theater system that seamlessly spans the divide between traditional and digital media technologies. Upscale your Blu-Ray discs and home theater components to magnificent 4K video resolution for your UHD TV. Or stream content wirelessly with Spotify Connect, Bluetooth®, Airplay, DLNA and built-in apps like YouTube. Featuring extensive audio and video support for all your media needs, BDS 785S is a definitive audio solution best placed at the center of tomorrow’s connected home.

Item# BDS 785SWAD/230-B2

General Specifications

Power requirement 100 – 240V AC, 50/60Hz
Power consumption <0.5W standby, 90W maximum
Source Unit Dimensions 400.2mm (L) x 283.8mm (W) x 78.5mm (H)
Source Unit Weight 3.56kg
Satellite Dimensions 88mm (L) x 110mm (W) x 299mm (H)
Satellite Weight 1.5 kg
Subwoofer Dimensions 267mm (L) x 267mm (W) x 353mm (H)
Subwoofer Weight 9kg

Audio Specifications

Total System Power 525 Watts
Continuous average power, stereo mode 65 Watts per channel, 20Hz – 20kHz, @<1% THD, both channels driven into 6 ohms
Subwoofer Power 200 Watts
Signal-to-noise ratio (IHF-A) –90dB
Frequency response @ 1W(±0.5dB) 20Hz – 20kHz

Video Specifications

Television Format PAL
HDMI™ version 1.4b With 3-D and 30/36-bit Deep Color
Click here for a complete list of all specs for this product

Spec Sheet (EN)

English 1 MB
  • 1 Harman Kardon BDS 580S
  • 1 HKTS 30WQ loudspeaker system
  • 1 Programmable Remote Control
  • 1 EzSet/EQ III microphone with 22' (6.7m) cable
  • 2 AAA batteries
  • 1 FM radio antenna
  • 2 wireless network antennas
  • 1 6' (1.8m) region-specific IEC power cord
  • 1 3’ (0.9m) HDMI cable
  • 5 Speaker Cables
  • 1 Subwoofer Cable
  • 4 Satellite Speaker Wall-Mount Brackets

The latest owner's manuals, quick start guides, and documents.

Hello. The furniture in which i intend to place the source Unit of BDS785 has height 100mm, just enough to fit the source Unit but not the antennas. If they are bent sideways (one to the left and the on the right), so that they can fit, would it be ok?

Asked by: Mankout
  • y_2019, m_3, d_21, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_bds785s, stg, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmankardon